Thick stair treads – Building regulations typically require that the stairs be within 3/4 inch by 10 inches wide. This includes recommended 3/4 to 1 1/4 inch outfit. If you’re thick stair treads are 10 inches long and not outfits add a 1 1/4 inch curtain by replacing them with treadmills made of 1-by-12s, which is actually 11 1/4 inches long. Replacing stairs with wider treads will result in longer and less steep stairs. It can be a problem if your stairs have to be steep to fit in a small room.
Measure your treads. If they have overhangs you can remove them and install treads that have a curvature of up to 1 1/4 inches. If you have 10-inch treadmills without a curb, cut the 1-by-12s width of your staircase. It must be at least 3 meters wide. If you want more attractive stairs to the interior of your house, use hardwood. Use your hammer to remove old treads as you replace them. Install treadmills with construction glue and wood finishing nails. Space nail 1 inch from each side of the tread and one in the middle. Fill nail holes with wood filler.
Divide the height of the stairs now by 7 ½, the recommended height of the riser in inches. If you use the recommended 10-inch treadmills, calculate how many steps you need a stairway slope of 34 to 37 degrees. Wider treads mean longer stairs. Use your hammer and the copper to remove the old stairs. Use a pencil, carpenter Tory and then sketch and cut a model where treads and risers will fit a 2-by-12 expansion card. Ten-inch treads must sit on a 10 3/8-inch wide shelf; 7½ inch risers must fit a 7 5/8 inch vertical support.
This post topic: Stair Treads