Wall Bar Cabinet – The organization is one of the keys of every kitchen. The design of this room in the house has to incorporate enough resources to make the work in it as simple as possible. First take the measurements of the hole you want to cover with the furniture, both the height, as the width and the bottom, to be able to cut the boards. Place the back and finish by placing the roof, for which you have to use the jaws.
Point out where you have to drill to place the screws and assemble the wall bar cabinet. In the following link, you can see how to assemble such panels assembled boards. Drill with a 5mm drill inside the sides where you want to place the shelf inside the furniture to be able to fix the supports of the shelf. Next, install the door. To do this, drill a 9cm diameter from the top with a 35mm diameter drill bit to fit the hinge.
Do it the same at the bottom by fixing the hinge to the door wall bar cabinet and then to the furniture. Place the hanging system on the wall where you want the furniture to go. Keep in mind what taco to put, for this you must take into account how much weight each taco supports. The other part, screw it on the edge of the top of the piece of furniture.
This post topic: Bar Cabinet